How do I connect my Smart Life to wi-fi
Click on the “+” in the main menu in the top right corner of the app and select the appropriate product category and the correct device. In our case “electrical system” -> “Socket (Wi-Fi)”. 2. In the next step, select your 2.4 GHz WiFi network, enter the password of your WiFi router and confirm with “Next”.
How do I connect my smart life to WiFi?
Instead. Now press next. If this message pops up just ignore it and select carry.
How do I change the WiFi on my smart life lights?
Open Smart Life (or Tuya Smart) and do as following:
- Remove the device in Smart Life (or Tuya Smart).
- Connect to a new 2.4 GHz network you want to apply to your smart device or devices on your phone.
- Select the Home tab.
- Tap on the plus icon at the top right corner.
- Select Add Device.
- Select the device from the list.
What is smart life on my WiFi?
Nedis Smartlife is a smart home system that allows you to control and monitor your home appliances and devices from your smartphone or tablet. With the Nedis Smartlife app, you can easily set up, manage and control your lights, plugs, thermostats, cameras and other smart devices, from anywhere and at any time.
How do I reconnect my smart devices after changing Wi-fi?
Unplug your old router. (If your old router is combined with your modem, you will need to go into its settings to disable the Wi-Fi network there.) All your devices should now automatically connect to your new router using the same network name and password. Verify your devices are working properly.
How do I reset my Smartlife WIFI plug?
Seconds. As you can see it is rapidly blinking that means this device is ready to connect to the Smart Life app if you remove this plug from the socket then connect it again. Now it's night blinking.
How do you reset a smart life device?
Hold the reset button (or switch the bulb off and on for 3 times) until the indication LED (or lighting device) flashes SLOWLY (as shown in example) If the light is flashing quickly, reset again by holding the reset button for about 5 seconds or switching the light off and on 3 times.
How do I connect to 2.4 GHz WiFi?
To connect your Android device to a 2.4 GHz network:
- Open the Settings app for your Android device.
- Tap Connections.
- Tap Wi-Fi.
- To see available networks, tap the Wi-Fi switch to On.
- Select a 2.4 GHz Wi-Fi network. …
- If prompted, enter the password for the network.
Should I enable Smart Connect WiFi?
Generally, Smart Connect is a convenient way to stay connected if you don't mind not connecting to the fastest band (5GHz or 6GHz) at all times. If you want more control over which band your device uses, turn Smart Connect off and separate the bands using different SSIDs.
How do I manually reconnect my Wi-Fi?
Press this button to turn off your modem. Wait two minutes. And press it again to turn it back on it will take about one minute for your device to power cycle through and for the lights to come back.
Why won’t my smart devices connect to Wi-Fi?
Move your smart home device to a new location, one that's closer to your Wi-Fi router. If it suddenly starts working, then the range is your issue. You need to find a new home for the device, closer to your router.
Why are my smart life plugs not connecting to wifi?
power up hardware item and go through the laborious SL set iup process, waiting the 2mins for it to connect; re-do this several times until it connects, it usually does. Check it works and check again. That's it.
How do I reset my smart life device?
Hold the reset button (or switch the bulb off and on for 3 times) until the indication LED (or lighting device) flashes SLOWLY (as shown in example) If the light is flashing quickly, reset again by holding the reset button for about 5 seconds or switching the light off and on 3 times.
How do I reset my device?
How to factory reset an Android using “Settings”
- Open “Settings.”
- Type “reset” into the search bar and click “Factory reset.”
- Click on “Reset device.”
- If prompted, enter your password.
- Click on “Reset all.”
How do I reset my smart at home router?
When the router is turned on, press and hold the reset button for 3 seconds using a pointed object until the light indicator flashes. Please note, restoring factory settings will clear all customized settings.
How do I connect 2.4 GHz to Wi-Fi instead of 5?
Connect to your 2.4 GHz network
Tap the Wi-Fi switch to the on position. Note: Wi-Fi is enabled when the Wi-Fi button is green. Select a 2.4 GHz Wi-Fi network. This is commonly indicated by a 2, 2.4, or 2G at the end of the network name or SSID.
How do I know if my Wi-Fi is 2.4 GHz or 5GHz?
Select the network properties (tap the gear icon or menu icon). Depending on the Android version check: Read the “Frequency” setting – shows as 2.4 or 5GHz. Read the “Network speed” setting – if speed is over 400 Mbps then you are using 5GHz network.
What is the best Wi-Fi setting for smart home devices?
For compatibility reasons, the best option is to stick to 2.4GHz for smart home products or use both 2.4GHz and 5GHz, if your router supports it.
Why do I need to connect to Wi-Fi?
Ability to access other devices connected to your network, for example, multiple computers can use one printer without a directly wired connection. Freedom from the hassle of installing wired connections in different rooms. Cost-effective. Security Enabled.
Why is my device not connecting to Wi-Fi?
One device can't connect to the Wi-Fi
It's probably just a momentary network issue, which is an easy fix. Try turning off the Wi-Fi on your device, then re-enabling it — or unplugging and replugging your Wi-Fi dongle. If that doesn't work, restart the device and try again. Then try restarting the router itself.
How do I enable my Wi-Fi connection?
From the home screen Hit menu. And go to settings. Under Wireless and networks tab you will see the option of wi-fi. Turn Wi-Fi on if not already switched on by the Box. Next tap on Wi-Fi settings.
Why I Cannot connect to my Wi-Fi?
Common Reasons You Can't Connect to WiFi
Most of the time, you can “set it and forget it” when it comes to your router. However, if your router has been up and running for a while, it may get bogged down—in which case simply unplugging, waiting a few seconds and plugging your router back in can help.
How do I connect to 2.4 GHz Wi-Fi?
To connect your Android device to a 2.4 GHz network:
- Open the Settings app for your Android device.
- Tap Connections.
- Tap Wi-Fi.
- To see available networks, tap the Wi-Fi switch to On.
- Select a 2.4 GHz Wi-Fi network. …
- If prompted, enter the password for the network.
How do I reset my Smartlife Wi-Fi plug?
Seconds. As you can see it is rapidly blinking that means this device is ready to connect to the Smart Life app if you remove this plug from the socket then connect it again. Now it's night blinking.
How do I know if my Wi-Fi is 2.4 or 5?
Select the network properties (tap the gear icon or menu icon). Depending on the Android version check: Read the “Frequency” setting – shows as 2.4 or 5GHz. Read the “Network speed” setting – if speed is over 400 Mbps then you are using 5GHz network.
Where is reset settings?
How to factory reset an Android using “Settings”
- Open “Settings.”
- Type “reset” into the search bar and click “Factory reset.”
- Click on “Reset device.”
- If prompted, enter your password.
- Click on “Reset all.”